PCTG+GF10 Filament - 1.75 mm - 0.75 kg - Outlet
$16.00
Sale price
$16.00
Regular price
$39.00
Skip to product information
PCTG+GF10 Filament - 1.75 mm - 0.75 kg - Outlet
$16.00
Sale price
$16.00
Regular price
$39.00
Print settings
- Printing temperature250-270°C
- Bed temperature100°C
- Build surfaceSmooth PEI + adhesive; Textured PEI; Glass + adhesive
- Drying conditions60°C / 4h
- Enclosurenot required
- Cooling fan0-25%
Tips and recommendations
- Nozzle:The material is highly abrasive. A hardened steel or ruby nozzle is required.
- Handling:Use gloves (micro-damage to the skin may occur). When handling, use a dust mask and safety goggles.
- Possible bed damage:Due to strong adhesion to the surface, printing directly on the bed or glass is not recommended, as this may cause damage. We recommend using adhesives or masking tape.
Properties
- Density1.31 g/cm³
- Tensile Strength @ Yield55 MPa (ISO 527)
- Tensile Strength @ Break25 MPa (ISO 527)
- Tensile Modulus3400 MPa (ISO 527)
- Elongation @ Break8% (ISO 527)
- Izod Impact Strength (Unnotched) @ 23℃60 kJ/m2 (ISO180)
- Heat Distortion Temperature @ 0.45 MPa76°C (ISO 75)
- Heat Distortion Temperature @ 1.8 MPa64°C (ISO 75)